REMOTE DIAGNOSTICS · TECHNICAL REPORTS

From fault codes to an action plan.

Americopp analyzes scanner-generated evidence to separate symptoms, consequences and probable causes before tests or component replacement are recommended.

DTCFreeze FrameLive DataPressure & FlowAction Plan

Americopp method

Analyze the complete report.
Correlate modules and systems.
Interpret live data when applicable.
Define confirmation tests.
Deliver an ordered technical action plan.

Choose the analysis level

Two technical report options.

The Basic Report uses the complete scanner PDF. The Advanced Report adds scanner-generated live-data recordings and an expanded technical questionnaire.

Initial evaluation

Basic Technical Report

US$10

Complete scanner PDF.
DTC and module analysis.
Probable causes.
Recommended tests and measurements.
Action plan.

Most complete

Advanced Technical Report

US$50

Everything in the Basic Report.
Scanner-generated live-data recording.
Time-correlated variable analysis.
Pressure and supply-capacity evaluation.
Target vs Actual comparison.
Causes prioritized by evidence.

Mandatory Advanced Report requirement: Americopp accepts only a complete PDF generated by the scanner and a live-data recording/export generated by the diagnostic tool itself. Photos, screenshots, phone videos, handwritten fault codes and manually transcribed values are not accepted.

1. Customer and vehicle information

NameEmail MakeModel YearEngine / engine code TransmissionMileage VIN

2. Location and environmental conditions

For the Advanced Report these fields are mandatory because altitude, barometric pressure, air density and ambient temperature affect MAP/BARO, load and boost interpretation.

CountryCity Approx. altitude (m)Approx. ambient temperature (°C)

Why we ask: a normal MAP/BARO reading at high altitude must not be judged against sea-level expectations.

3. Fuel and modifications

Fuel / octaneCalibration / Stage Vehicle modifications

4. Symptom and fault conditions

Describe exactly what the vehicle does Fault pattern Main condition

5. Previous repairs and diagnostic equipment

Repairs, replaced parts, programming or coding already performed Scanner make and model Software / version

6. Diagnostic files

PDFComplete PDF generated by the scannerFull Auto Scan / Vehicle Scan. Maximum 25 MB.

No PDF selected.

DATAScanner-generated live-data recordingFile exported by the tool: CSV, XLS/XLSX, PDF, TXT/LOG, JSON/XML or scanner data file.

No scanner datalog selected.

I confirm that both files were generated directly by the diagnostic equipment. I understand that screenshots, photos, phone videos and manually transcribed data do not replace these files.

7. How to record live data

Record only safe operating conditions. Do not perform high-load testing with severe misfires, lean operation, abnormal oil pressure, overheating, fuel-pressure loss or mechanical noise.

KOEOKey ON, engine OFF. MAP/BARO reference.

Stable idle1–2 minutes to establish a baseline.

2,000–3,000 rpmNo load, when safe.

Light/moderate loadReal road behavior.

Exact fault eventThe most valuable diagnostic recording.

High loadOnly when technically safe.

Recommended PIDs when available

RPMEngine LoadThrottleMAP / BAROMAFBoost Target / ActualLambda Target / ActualSTFT / LTFTLPFP Target / ActualRail Target / ActualInjector Pulse WidthMisfire CountersIgnition TimingKnock CorrectionCoolant / IATBattery VoltageVANOS Target / ActualValvetronic / EKP

8. Payment and submission

PayPal

Selected service payment

US$10per analysis

Pay the amount corresponding to the selected service and keep the transaction ID.

PayPal email: mastermecatronicoase@gmail.com

Open PayPal

Americopp will verify payment before the analysis begins.

PayPal transaction IDPayer name or email

Technical validation: if Advanced Report material is insufficient or was not generated by the scanner, analysis does not begin. Americopp will specify what new recording is required.

After submission you will receive a case number. Uploaded files will be associated with that case.

Advanced Report workflow

Data first. Diagnosis second.

1Questionnaire

2PDF + datalog

3Technical validation

4Payment confirmed

5Technical report

What the customer receives

Executive summary, DTC analysis, datalog interpretation, system correlation, probable causes ranked by evidence, confirmation tests, action plan, priorities, risks, post-repair validation criteria and technical conclusion.

Remote analysis does not replace physical testing when required. The report may call for pressure and flow measurement, oscilloscope testing, smoke testing, compression, leak-down, electrical measurements or other verification.